Polishing Slime Bag™ — 1-Micron Pool Polish for Water So Clear It Shines - 40 GPM

Your pool filter is good. The Polishing Slime Bag makes it flawless.

Even the best pool filters stop at 20–50 microns. The Polishing Slime Bag™ goes to 1 micron — capturing the ultra-fine silt, debris, and algae particles your system lets right through. The result is water that doesn't just look clean. It looks like glass.

No extra chemicals. No complicated setup. Just connect it to your return line and let your existing pump do the work.

Compatible with Intex, Bestway, and most standard above ground and inflatable pool return lines.

How Fine Is 1 Micron?

A grain of sand is 100–500 microns. A red blood cell is 5 microns. At 1 micron, the Polishing Slime Bag™ captures particles completely invisible to the naked eye — the exact particles responsible for that hazy, dull water that won't clear no matter what you add.

If your pool looks cloudy and chemistry checks out fine, ultra-fine particles are almost always the cause. This is what fixes it.

What It Does for You

Clears cloudy and hazy water fast Don't wait days for your pool to recover. The Polishing Slime Bag™ works while your pump runs, visibly clearing water within hours in most cases.

No more guessing with chemicals Cloudy water leads pool owners to over-dose chlorine and clarifiers — which often makes things worse. This removes the particles causing cloudiness without touching your chemistry.

Handles the aftermath Storms, algae blooms, heavy pool parties — the Polishing Slime Bag™ is the fastest way to restore crystal-clear water when your pool takes a hit.

Reusable all season long When the bag gets dirty, pull it out, rinse it off, and put it back. No cartridges to buy, no waste, no ongoing cost.

Made in the USA Built with high-efficiency filtration material and quality construction you can count on season after season.

Specs

Sizing note: Match your pump's flow rate to the bag's rated flow rate before ordering. This standard size handles up to 40 GPM. Need help sizing? Contact us before you buy.

Perfect For

• Clearing cloudy, hazy, or dull pool water
• Post-storm and post-algae cleanup
• Weekly polishing to maintain flawless clarity all season
• Residential pools with standard flow rates up to 40 GPM

How to Use

1. Attach the Polishing Slime Bag™ to your pool's return line
2. Run your pump as normal
3. Rinse the bag when it becomes visibly dirty — then reuse

Setup takes under 5 minutes. No plumbing experience needed.

⚠️ Heads up before you order: An adaptor fitting is required to connect the Polishing Slime Bag™ to most pool return lines. The adaptor is sold separately — [The Slime Bag™ Adaptor Fitting is available here]. If you're unsure whether you need one, contact us and we'll help you get the right setup.

The Polishing Slime Bag™ is the finishing step your pool filtration system is missing. Add it to your return line today and see the difference 1-micron filtration makes.